-
MARKET
- Chemical
Whether you need to determine molecular weights, identify new compounds, monitor the effects of process or manufacturing changes, or troubleshoot customer and product support applications, Waters standards and reagents can help you enhance the efficiency and quality of your chemical analyses.
.jpg)
- Environmental
Waters instrumentation, standards, and sample preparation products are used for environmental analysis in laboratories throughout the world.
.jpg)
- Food and Beverages
From QC testing of final product to meeting the demand for new products with additional nutritional value, food and beverage manufacturers face difficult challenges. Waters can help meet those challenges with standards and reagents that offer the sensitivity, reproducibility, and versatility required to ensure you can profitably manage laboratory requirements.
.jpg)
- Life Sciences and Pharmaceuticals
Waters has developed a portfolio of life science consumables specifically designed to ensure the best results from MS and LC-MS systems.
- Chemical
-
SYSTEMS
- Advanced Polymer Chromatography (APC)
APC™ Calibration Standards eliminate the need to manually prepare custom standard calibration mixes, as ACQUITY APC Calibration Standards provide the right number of data points for the targeted MW range.
- UPLC with UV Detection
These standards and standards kits are used for the calibration and assessment of ACQUITY UPLC® System performance.
- GC
These standards and standards kits are used for the qualification and assessment of gas chromatography (GC) system performance.
- GC-MS
The multi and individual components in these kits are used for set up, tuning, calibration, and sensitivity measurements on GC-MS detectors.
.jpg)
- HPLC with RI, ELSD, Electrochemical, Fluorescence or Conductivity Detection
These kits can be used to provide calibration and assessment of various detectors including refractive index , conductivity, evaporative light scattering, fluorescence and electrochemical.
- HPLC or Prep Systems with UV Detection
These standards and standards kits are used for the calibration and assessment of HPLC system performance.
- SFC and Convergence Chromatography (UPC2)
These kits should be used to assess the performance of SFC or ACQUITY UPC2 Systems. There are multi-component and individual component kits.
- Single Quadrupole Mass Detection
These multi-component kits and individual standards are used for set-up, tuning, calibration, and sensitivity measurements on a MS single quadrupole detector.
- Tandem Quadrupole (Triple Quadrupole )
The kits are appropriate to calibrate or assess the performance of your triple quadrupole detector.
- Time-of-flight Mass Spectrometry
These multi-component and individual compound kits are commonly used to perform a series of system-level performance tests for MS time-of-flight installation and as routine use standards and calibrants.
- Advanced Polymer Chromatography (APC)
-
APPLICATIONS
- Amino Acids
- Cations
Used for cation analysis by Ion Chromatography, these standards for cation analysis can be used for primary calibration or to prepare second source calibration check standards.
- Gel Filtration
For aqueous molecular weight determination.
- Gel Permeation
Polystyrene calibration standards of various molecular weights for use in characterizing or confirming your chemical analysis.
- Glycans
The Glycan Standards were developed to complement the Waters Glycan column and system solutions, to benchmark system performance and calibration.
- Ion Calibration
- Oligonucleotides
The Oligonucleotide Standards were developed to complement the Waters Oligonucleotide column and system solutions, to benchmark system performance and calibration.
- Peptides
The peptide consumable line provides complex standards using high quality raw materials that are critical to the quality of LC and LC-MS results. These standards traceability.
- Pesticides
Precisely formulated and ready-to-use. These pesticide screening standards help you derive optimal performance from your LC and MS instruments and ensure every analysis gets off to an accurate start.
- Proteins
These specifically formulated standards are prepackaged in Waters vials allowing for direct solubilization providing ease of use, minimizing sample loss and discrepancies. These Protein Analysis Columns are also used for QC validation of columns.
- QC Trace Metals
- Small Molecules
The small molecule consumable line provides relevant application specific standards for evaluating and running many of the Waters Omics Systems.
- Total Chlorine
- Amino Acids
-
PRODUCT TYPE
- pH Buffers
pH Buffers are directly traceable to NIST SRMs, mercury free, and guaranteed stable for at least one year.
- Quality Control (QC) Reference Material
The Quality Control (QC) Reference Material portfolio is a unique collection of standards and mixtures. These products allow the user to evaluate and benchmark their LC and LC-MS chromatography system before analysis of critical analytes.
- Reagents
Waters provides ready-to-use reagents that are prepared using the highest quality materials for all your critical analyses.
- System Performance Standards and Reagents
Even the best laboratory equipment depends on accurate calibration. Waters understands this, and has developed a family of highly reliable, proven products for establishing and documenting instrument and application performance.
- pH Buffers
- WATERS ADVANTAGE
- Advanced Polymer Chromatography (APC)
- UPLC with UV Detection
- GC
- GC-MS
- HPLC with RI, ELSD, Electrochemical, Fluorescence or Conductivity Detection
- HPLC or Prep Systems with UV Detection
- SFC and Convergence Chromatography (UPC2)
- Single Quadrupole Mass Detection
- Tandem Quadrupole (Triple Quadrupole )
- Time-of-flight Mass Spectrometry
- Amino Acids
- Cations
- Gel Filtration
- Gel Permeation
- Glycans
- Ion Calibration
- Oligonucleotides
- Peptides
- Pesticides
- Proteins
- QC Trace Metals
- Small Molecules
- Total Chlorine
- pH Buffers
- Quality Control (QC) Reference Material
- Reagents
- System Performance Standards and Reagents
Find Your Results
UltraPerformance Liquid Chromatography (UPLC®) combined with mass spectrometric detection (MS) is used successfully in the bioanalysis of small molecules. The small molecule consumable line provides relevant application specific standards for evaluating and running many of the Waters Omics Systems.
Analgesic Mix Standard [186006350]
The Analgesics Mix is a specialty standard developed to aid in the transfer of HPLC to UPLC methods and provides a benchmark for the system once the transfer is completed. This mix is composed of seven specifically chosen compounds that are resolved well and provide a good representative span of the chromatographic range. This mix is not only valuable to use as a validation standard for initial method transfer, it also provides the additional benefit of establishing a baseline chromatogram for the system. Therefore, it is recommended to run this mix on a regular basis after the initial method setup to continually check and compare the original benchmark chromatogram for system performance.
AutoPurification System Standard [716000765]
The AutoPurification System Standard allows the user to evaluate and benchmark the performance of an AutoPurification/Preparative System through fraction collection before analysis of critical material. This Quality Control Reference Material is specially formulated to allow the user to verify correct fraction collection. The test is highly valuable when performed at first use/installation, and any time the system has not been used or has had any changes.
Extractables & Leachables Screening Standard [186008063]
The Extractables & Leachables Screening Standard is designed to complement the Waters® Screening Platform Solution with UNIFI™. This mix is composed of 18 common polymer additives allowing users to evaluate and benchmark high resolution LC-MS systems.
The Extractables & Leachables Screening Standard covers a mass range of up to 1176 Da, supporting both positive and negative ionization modes. Compounds were specifically chosen due to stable retention times and easy evaluation of mass accuracy. Simplify your screening workflow and eliminate time consuming standard preparation steps when analyzing samples for unknown contaminants.
HILIC QC Reference Material [186007226]
The HILIC QC Reference Material is designed for use with UV and MS chromatographic systems using a HILIC column. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.
LCMS QC Reference Standard [186006963]
The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.
MetID Small Molecule Standard Mix [186006550]
The MetID Small Molecule Standard Mix is used to test and demonstrate the Waters UNIFI® Application Solution for Metabolite Identification.
Neutrals QC Reference Material [186006360]
The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods.
Preparative Chromatography Mix Standard [186006703]
The Preparative Chromatography Mix Standard is a specially formulated mix for the preparative or purification system. The Preparative Chromatography Mix Standard allows the user to evaluate and benchmark their chromatography prep or purification system with UV or MS before analysis of critical material. The Preparative Chromatography Standard includes a void marker, neutral, acidic and basic compounds. It can be used with a variety of column chemistries and dimensions, and system hardware.
Reversed-Phase QC Reference Material [186006363]
The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.
