The 2-AB Glycan Performance Test Standard is QC verified to contain the components needed to benchmark and evaluate ACQUITY UPLC or XBridge BEH Amide Columns. This standard should be used on a regular basis for benchmarking column and system performance. It is a qualitative standard of 2-AB labeled, released glycans from Human-like IgG that are spiked with Man-5 and Man-6.

The 2-AB Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the 2-AB labeled dextran ladder and assigned with glucose unit (GU) values. This calibration ladder provides good peak shape and reliable identification from 2 to 30 glucose units, which is twice as much as the other dextran ladder standards. This feature improves the large glycan retention time assignment.

The AccQ•Tag Chemistry Kit contains the necessary components needed for HPLC analysis of protein and peptide hydrolysate amino acids. The kit provides sufficient reagents for 250 analyses.

The AccQ•Tag Eluent A Concentrate is used for the analysis of protein hydrolysates, foods and feeds, cell cultures, and alkylated cysteines. This concentrated eluate is used as a component of the AccQ•Tag Chemistry Kit.

The AccQ•Tag Eluent B is used for the analysis of protein hydrolysates, foods and feeds, cell cultures, and alkylated cysteine. This ready-to use eluate is used as a component of the AccQ•Tag Chemistry Kit.

The Amino Acid Standard contains a mixture of 17 hydrolysate amino acids and is intended for use with the Pico•Tag Chemistry package, Pico•Tag Reagent Kit, AccQ•Tag Chemistry Package, and AccQ•Tag Ultra Chemistry Kit.

The AccQ•Tag Chemistry Kit contains the necessary components needed for HPLC analysis of protein and peptide hydrolysate amino acids. The kit provides sufficient reagents for 250 analyses.

The AccQ•Tag Eluent B is used for the analysis of protein hydrolysates, foods and feeds, cell cultures, and alkylated cysteine. This ready-to use eluate is used as a component of the AccQ•Tag Chemistry Kit.

The Amino Acid Standard contains a mixture of 17 hydrolysate amino acids and is intended for use with the Pico•Tag Chemistry package, Pico•Tag Reagent Kit, AccQ•Tag Chemistry Package, and AccQ•Tag Ultra Chemistry Kit.

The AccQ•Tag Chemistry Kit contains the necessary components needed for HPLC analysis of protein and peptide hydrolysate amino acids. The kit provides sufficient reagents for 250 analyses.

The AccQ•Tag Eluent A Concentrate is used for the analysis of protein hydrolysates, foods and feeds, cell cultures, and alkylated cysteines. This concentrated eluate is used as a component of the AccQ•Tag Chemistry Kit.

The Amino Acid Standard contains a mixture of 17 hydrolysate amino acids and is intended for use with the Pico•Tag Chemistry package, Pico•Tag Reagent Kit, AccQ•Tag Chemistry Package, and AccQ•Tag Ultra Chemistry Kit.

The UPLC^® AAA Application Add-on Kit is intended for existing ACQUITY UPLC^® users who want to begin performing amino acid analysis (AAA). This add-on kit contains the AccQ•Tag™ Ultra Refill Package, manuals, method template, and system accessories. This kit is intended to be purchased when adding AAA to an ACQUITY UPLC System.

The UPLC^® AAA H-Class Applications Kit is intended for ACQUITY UPLC^® H-Class users who want to begin performing amino acid analysis (AAA). This kit contains the AccQ•Tag™ Ultra Refill Package, manuals, method template, and system accessories. This kit is intended to be purchased when adding AAA to an existing ACQUITY UPLC H-Class System.

AccQ•Tag Ultra Derivatization Kit is used for derivatizing primary and secondary amino acids in a single step. This kit is a component of the UPLC Amino Acid Analysis (AAA) Application Solution and contains sufficient reagents for 250 analyses.

The AccQ•Tag^™ Ultra Eluent A Concentrate is a concentrated aqueous buffer used as a mobile phase for amino acid analysis of protein hydrolysates, foods and feeds, alkylated cysteines, and cell cultures. This premixed eluate is a component of the AccQ•Tag Ultra Chemistry Kit.

The AccQ•Tag Ultra Eluent B is used as a mobile phase for amino acid analysis of protein hydrolysates, foods and feeds, alkylated cysteines, and cell cultures. It is a component of the AccQ•Tag Ultra Chemistry Kit.

AccQ•Tag Ultra Refill Package contains the components needed to replenish the chemistries that are a part of the UPLC AAA Application Kit for ACQUITY UPLC and UPLC AAA H-Class Applications Kit. This refill package is not intended to be purchased as part of an initial system.

The AccQ•Tag^™ Ultra Eluent A Concentrate is a concentrated aqueous buffer used as a mobile phase for amino acid analysis of protein hydrolysates, foods and feeds, alkylated cysteines, and cell cultures. This premixed eluate is a component of the AccQ•Tag Ultra Chemistry Kit.

The AccQ•Tag Ultra Eluent B is used as a mobile phase for amino acid analysis of protein hydrolysates, foods and feeds, alkylated cysteines, and cell cultures. It is a component of the AccQ•Tag Ultra Chemistry Kit.

AccQ•Tag Ultra Refill Package contains the components needed to replenish the chemistries that are a part of the UPLC AAA Application Kit for ACQUITY UPLC and UPLC AAA H-Class Applications Kit. This refill package is not intended to be purchased as part of an initial system.

AccQ•Tag Ultra Derivatization Kit is used for derivatizing primary and secondary amino acids in a single step. This kit is a component of the UPLC Amino Acid Analysis (AAA) Application Solution and contains sufficient reagents for 250 analyses.

The AccQ•Tag Ultra Eluent B is used as a mobile phase for amino acid analysis of protein hydrolysates, foods and feeds, alkylated cysteines, and cell cultures. It is a component of the AccQ•Tag Ultra Chemistry Kit.

AccQ•Tag Ultra Refill Package contains the components needed to replenish the chemistries that are a part of the UPLC AAA Application Kit for ACQUITY UPLC and UPLC AAA H-Class Applications Kit. This refill package is not intended to be purchased as part of an initial system.

AccQ•Tag Ultra Derivatization Kit is used for derivatizing primary and secondary amino acids in a single step. This kit is a component of the UPLC Amino Acid Analysis (AAA) Application Solution and contains sufficient reagents for 250 analyses.

The AccQ•Tag^™ Ultra Eluent A Concentrate is a concentrated aqueous buffer used as a mobile phase for amino acid analysis of protein hydrolysates, foods and feeds, alkylated cysteines, and cell cultures. This premixed eluate is a component of the AccQ•Tag Ultra Chemistry Kit.

AccQ•Tag Ultra Refill Package contains the components needed to replenish the chemistries that are a part of the UPLC AAA Application Kit for ACQUITY UPLC and UPLC AAA H-Class Applications Kit. This refill package is not intended to be purchased as part of an initial system.

The UPLC^® AAA H-Class Applications Kit is intended for ACQUITY UPLC^® H-Class users who want to begin performing amino acid analysis (AAA). This kit contains the AccQ•Tag™ Ultra Refill Package, manuals, method template, and system accessories. This kit is intended to be purchased when adding AAA to an existing ACQUITY UPLC H-Class System.

The AccQ•Tag Chemistry Kit contains the necessary components needed for HPLC analysis of protein and peptide hydrolysate amino acids. The kit provides sufficient reagents for 250 analyses.

The 2-AB Glycan Performance Test Standard is QC verified to contain the components needed to benchmark and evaluate ACQUITY UPLC or XBridge BEH Amide Columns. This standard should be used on a regular basis for benchmarking column and system performance. It is a qualitative standard of 2-AB labeled, released glycans from Human-like IgG that are spiked with Man-5 and Man-6.

The 2-AB Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the 2-AB labeled dextran ladder and assigned with glucose unit (GU) values. This calibration ladder provides good peak shape and reliable identification from 2 to 30 glucose units, which is twice as much as the other dextran ladder standards. This feature improves the large glycan retention time assignment.

The Fluorescence Detector Standard is intended to be used for system assessment of an Alliance^® HPLC with Fluorescence Detector. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The ACQUITY UPLC^® Absorb 10mm Cell Test Solution is used to perform system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10 mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self-directed qualification training and license.  

Please contact your local office for more information on certification and training service. 

The product can replace part number 700002642 if propiophenone is not required.

The Preparative Chromatography Mix Standard is a specially formulated mix for the preparative or purification system. The Preparative Chromatography Mix Standard allows the user to evaluate and benchmark their chromatography prep or purification system with UV or MS before analysis of critical material. The Preparative Chromatography Standard includes a void marker, neutral, acidic and basic compounds. It can be used with a variety of column chemistries and dimensions, and system hardware.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MassPREP™ Protein Standard Mix is designed for verification of HPLC/UPLC^® instruments and performance of columns used for protein analysis, specfically the ACQUITY UPLC^® and XBridge^® BEH300 C₄ Columns. This intact protein validation mix should be used on a regular basis for monitoring column and system performance. The standard is contains ribonuclease A, cytochrome c, bovine serum albumin, myoglobin, enolase, and phosphorylase B, which have a wide range of isoelectric points, molecular weights, and hydrophobicities.

The BEH200 SEC Protein Standard Mix is used for benchmarking the ACQUITY UPLC Protein BEH SEC 200, 1.7 µm Columns. This standard should be used on a regular basis for evaluation of column and system performance.

The BEH450 SEC Protein Standard Mix is used to benchmark the ACQUITY UPLC Protein BEH SEC 450, 2.5 µm Columns.It is recommended that this standard be used on a regular basis for evaluation of column and system performance.

The MassPREP™ Protein Standard Mix is designed for verification of HPLC/UPLC^® instruments and performance of columns used for protein analysis, specfically the ACQUITY UPLC^® and XBridge^® BEH300 C₄ Columns. This intact protein validation mix should be used on a regular basis for monitoring column and system performance. The standard is contains ribonuclease A, cytochrome c, bovine serum albumin, myoglobin, enolase, and phosphorylase B, which have a wide range of isoelectric points, molecular weights, and hydrophobicities.

The BEH125 SEC Protein Standard Mix is used to benchmark the ACQUITY UPLC Protein BEH SEC 125, 1.7 µm Columns. This standard should be used on a regular basis for evaluation of column and system performance.

The BEH450 SEC Protein Standard Mix is used to benchmark the ACQUITY UPLC Protein BEH SEC 450, 2.5 µm Columns.It is recommended that this standard be used on a regular basis for evaluation of column and system performance.

The MassPREP™ Protein Standard Mix is designed for verification of HPLC/UPLC^® instruments and performance of columns used for protein analysis, specfically the ACQUITY UPLC^® and XBridge^® BEH300 C₄ Columns. This intact protein validation mix should be used on a regular basis for monitoring column and system performance. The standard is contains ribonuclease A, cytochrome c, bovine serum albumin, myoglobin, enolase, and phosphorylase B, which have a wide range of isoelectric points, molecular weights, and hydrophobicities.

The BEH200 SEC Protein Standard Mix is used for benchmarking the ACQUITY UPLC Protein BEH SEC 200, 1.7 µm Columns. This standard should be used on a regular basis for evaluation of column and system performance.

The BEH125 SEC Protein Standard Mix is used to benchmark the ACQUITY UPLC Protein BEH SEC 125, 1.7 µm Columns. This standard should be used on a regular basis for evaluation of column and system performance.

Biopharmaceutical Training Standards is a component of the Biopharmaceutical Training Kit used in conjunction with Biopharmaceutical Preparation Kit which was designed to provide trainers and customers with high quality standards that can be utilized as a starting point for running biopharm applications on Waters UPLC inlet with Q-Tof mass spectrometry detection systems. The training kits pull together many of the individual samples that are often used in demos and training classes, including reference compounds for calibration and lockmass.

Biopharmaceutical Preparation Kit is a component of the Biopharmaceutical Training Kit used in conjunction with Biopharmaceutical Training Standards Kit which was designed to provide trainers and customers with high quality standards that can be utilized as a starting point for running biopharm applications on Waters ACQUITY UPLC inlet with Q-Tof mass spectrometry detection systems. The training kits pull together many of the individual samples that are often used in demos and training classes, including reference compounds for calibration and lockmass. 

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ ADH Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ E.Coli Digestion Standard is part of a line of qualitative digestion standards and provides a complex biological matrix for proteomic evaluations using LC-MS, specifically Waters Protein Expression System.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

The 2-AB Glycan Performance Test Standard is QC verified to contain the components needed to benchmark and evaluate ACQUITY UPLC or XBridge BEH Amide Columns. This standard should be used on a regular basis for benchmarking column and system performance. It is a qualitative standard of 2-AB labeled, released glycans from Human-like IgG that are spiked with Man-5 and Man-6.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

The GlycoWorks HILIC 96-well Plate is a key component of the GlycoWorks Sample Preparation offering. The HILIC solid-phase extraction (SPE) material is used and tested for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label.

The 2-AB Glycan Performance Test Standard is QC verified to contain the components needed to benchmark and evaluate ACQUITY UPLC or XBridge BEH Amide Columns. This standard should be used on a regular basis for benchmarking column and system performance. It is a qualitative standard of 2-AB labeled, released glycans from Human-like IgG that are spiked with Man-5 and Man-6.

The 2-AB Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the 2-AB labeled dextran ladder and assigned with glucose unit (GU) values. This calibration ladder provides good peak shape and reliable identification from 2 to 30 glucose units, which is twice as much as the other dextran ladder standards. This feature improves the large glycan retention time assignment.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM).

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

The 2-AB Glycan Performance Test Standard is QC verified to contain the components needed to benchmark and evaluate ACQUITY UPLC or XBridge BEH Amide Columns. This standard should be used on a regular basis for benchmarking column and system performance. It is a qualitative standard of 2-AB labeled, released glycans from Human-like IgG that are spiked with Man-5 and Man-6.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The GlycoWorks HILIC 96-well Plate is a key component of the GlycoWorks Sample Preparation offering. The HILIC solid-phase extraction (SPE) material is used and tested for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM).

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

The RapiFluor-MS Glycan Performance Test Standard is intended to be used as a benchmarking standard and labeled, complex control to compliment the GlycoWorks RapiFluor-MS N-Glycan Kit solution. 

The RapiFluor-MS Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the RapiFluor-MS-labeled dextran ladder and assigned with glucose unit (GU) values. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The GlycoWorks HILIC 96-well Plate is a key component of the GlycoWorks Sample Preparation offering. The HILIC solid-phase extraction (SPE) material is used and tested for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM).

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

The RapiFluor-MS Glycan Performance Test Standard is intended to be used as a benchmarking standard and labeled, complex control to compliment the GlycoWorks RapiFluor-MS N-Glycan Kit solution. 

The RapiFluor-MS Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the RapiFluor-MS-labeled dextran ladder and assigned with glucose unit (GU) values. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The GlycoWorks HILIC 96-well Plate is a key component of the GlycoWorks Sample Preparation offering. The HILIC solid-phase extraction (SPE) material is used and tested for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM).

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

The RapiFluor-MS Glycan Performance Test Standard is intended to be used as a benchmarking standard and labeled, complex control to compliment the GlycoWorks RapiFluor-MS N-Glycan Kit solution. 

The RapiFluor-MS Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the RapiFluor-MS-labeled dextran ladder and assigned with glucose unit (GU) values. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The GlycoWorks HILIC 96-well Plate is a key component of the GlycoWorks Sample Preparation offering. The HILIC solid-phase extraction (SPE) material is used and tested for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label.

The Intact mAb Mass Check Standard is a LC-MS standard used as a qualitative tool for intact mass analysis. This standard is designed to be used for routine MS optimization, system setup and performance testing.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM).

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

The RapiFluor-MS Glycan Performance Test Standard is intended to be used as a benchmarking standard and labeled, complex control to compliment the GlycoWorks RapiFluor-MS N-Glycan Kit solution. 

The RapiFluor-MS Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the RapiFluor-MS-labeled dextran ladder and assigned with glucose unit (GU) values. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants.

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The GlycoWorks HILIC 96-well Plate is a key component of the GlycoWorks Sample Preparation offering. The HILIC solid-phase extraction (SPE) material is used and tested for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label.

The Intact mAb Mass Check Standard is a LC-MS standard used as a qualitative tool for intact mass analysis. This standard is designed to be used for routine MS optimization, system setup and performance testing.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM).

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

The RapiFluor-MS Glycan Performance Test Standard is intended to be used as a benchmarking standard and labeled, complex control to compliment the GlycoWorks RapiFluor-MS N-Glycan Kit solution. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants.

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The Intact mAb Mass Check Standard is a LC-MS standard used as a qualitative tool for intact mass analysis. This standard is designed to be used for routine MS optimization, system setup and performance testing.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The Intact mAb Mass Check Standard is a LC-MS standard used as a qualitative tool for intact mass analysis. This standard is designed to be used for routine MS optimization, system setup and performance testing.

The Ammonium Formate Concentrate is the recommended buffer that is used with the Biopharm/Glycan system, using the  ACQUITY UPLC^® H-class and the ACQUITY UPLC BEH Glycan Column.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The Intact mAb Mass Check Standard is a LC-MS standard used as a qualitative tool for intact mass analysis. This standard is designed to be used for routine MS optimization, system setup and performance testing.

The Ammonium Formate Concentrate is the recommended buffer that is used with the Biopharm/Glycan system, using the  ACQUITY UPLC^® H-class and the ACQUITY UPLC BEH Glycan Column.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The GlycoWorks HILIC 96-well Plate is a key component of the GlycoWorks Sample Preparation offering. The HILIC solid-phase extraction (SPE) material is used and tested for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM).

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

The RapiFluor-MS Glycan Performance Test Standard is intended to be used as a benchmarking standard and labeled, complex control to compliment the GlycoWorks RapiFluor-MS N-Glycan Kit solution. 

The RapiFluor-MS Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the RapiFluor-MS-labeled dextran ladder and assigned with glucose unit (GU) values. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The GlycoWorks HILIC 96-well Plate is a key component of the GlycoWorks Sample Preparation offering. The HILIC solid-phase extraction (SPE) material is used and tested for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM).

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

The RapiFluor-MS Glycan Performance Test Standard is intended to be used as a benchmarking standard and labeled, complex control to compliment the GlycoWorks RapiFluor-MS N-Glycan Kit solution. 

The RapiFluor-MS Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the RapiFluor-MS-labeled dextran ladder and assigned with glucose unit (GU) values. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants.

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The GlycoWorks HILIC 96-well Plate is a key component of the GlycoWorks Sample Preparation offering. The HILIC solid-phase extraction (SPE) material is used and tested for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM).

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

The RapiFluor-MS Glycan Performance Test Standard is intended to be used as a benchmarking standard and labeled, complex control to compliment the GlycoWorks RapiFluor-MS N-Glycan Kit solution. 

The RapiFluor-MS Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the RapiFluor-MS-labeled dextran ladder and assigned with glucose unit (GU) values. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants.

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUITY UPLC Glycan Application Solution to generate high quality data from the analyses of pre-column derivatized, labeled N-glycans. A key component of this offering is Waters HILIC Solid-Phase Extraction (SPE) plate for separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 48 samples.

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synergistically work with our existing ACQUITY UPLC Glycan Application Solution for the generation of high quality data from the analyses or pre-column derivatized, labeled N-glycans. A key component of this offering involves the use of Waters HILIC solid-phase extraction (SPE) material for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label. This kit can process 10 samples.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery.

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

RapiGest SF, is a patented anionic surfactant that drastically improves in-gel and in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis to minimize high background noise often seen from other common surfactants. Add RapiGest SF to your proteolytic digestion, (using trypsin or other enzymes) to enhance digestion speed and increase peptide recovery. 

The GlycoWorks HILIC 96-well Plate is a key component of the GlycoWorks Sample Preparation offering. The HILIC solid-phase extraction (SPE) material is used and tested for the separation of released glycans from the protein and for the subsequent separation of the labeled glycans from the free excess label.

The GlycoWorks Control Standard is used for validation and troubleshooting when using the GlycoWorks High-throughput or Single Use kits. It is an undigested, unlabeled, Human IgG standard. When purchasing the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit, this standard is included but can also be purchased separately.

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactions to follow the GlycoWorks High-throughput or Single Use Kit protocols. This kit is sold as a refill for use with the GlycoWorks Single Use Sample Preparation Kit or the GlycoWorks High-throughput Sample Preparation Kit. 

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM).

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

The RapiFluor-MS Glycan Performance Test Standard is intended to be used as a benchmarking standard and labeled, complex control to compliment the GlycoWorks RapiFluor-MS N-Glycan Kit solution. 

The RapiFluor-MS Dextran Calibration Ladder was developed to help take full advantage of the BEH glycan column, to assist glycan profiling. The glycan profile obtained from UPLC-HILIC/FLR systems can be calibrated against the RapiFluor-MS-labeled dextran ladder and assigned with glucose unit (GU) values. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

RapiGest SF, is a patented anionic surfactant that drastically improves in-solution protein digestion in terms of speed and peptide recovery. It is especially valuable in protein sample preparation for mass spectrometry (MS) analysis by avoiding high background noise often seen from other common surfactants.

The Hi3 Phos B standard is a quantitative standard primarily intended for use with the Hi3 quantification method for MS^E proteomics data processed with ProteinLynx Global Server for samples of microbial origin. It may also used in the evaluation and benchmarking of proteomic LC-MS systems comprised of nanoACQUITY^® UPLC^® and Synapt^® and Xevo^® time-of-flight mass spectrometers.

The Hi3 Phos B standard is intended for samples of microbial origin. It is comprised of the top 6 ionizing peptides in the rabbit Phosphorylase B protein.

The MassPREP™ Protein Digestion Standard Mix 1 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a relatively close equimolar ratio of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The MassPREP™ Protein Digestion Standard Mix 2 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a range of molar ratios of tryptically digested proteins for more in-depth anaylsis. This standard mix consists of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The Hi3 E.Coli standard is a quantitative standard primarily intended for use with the Hi3 quantification method for MS^E proteomics data processed with ProteinLynx Global Server for samples of microbial origin. It may also be used in the evaluation and benchmarking of proteomic LC-MS systems comprised of nanoACQUITY^® UPLC® and Synapt^® and Xevo^® time-of-flight mass spectrometers. The Hi3 E.Coli standard is intended for samples of animal origin. It is comprised of the top 6 ionizing peptides in the E.coli ClpB protein.

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The IEX Cation Test Standard is designed for use with the Waters Protein-Pak Hi Res IEX Columns, to allow a benchmark of the column when using cation exchange. It is recommended that this standard be used on a regular basis for benchmarking column and system performance. It is a specialized set of 3 intact proteins optimized for IEX cation column chromatography.

The IEX Anion Test Standard is designed for use with the Waters Protein-Pak™ Hi Res IEX Columns, to allow a benchmark of the column when using anion exchange. It is recommended that this standard be used on a regular basis for benchmarking column and system performance.

The BEH200 SEC Protein Standard Mix is used for benchmarking the ACQUITY UPLC Protein BEH SEC 200, 1.7 µm Columns. This standard should be used on a regular basis for evaluation of column and system performance.

The BEH450 SEC Protein Standard Mix is used to benchmark the ACQUITY UPLC Protein BEH SEC 450, 2.5 µm Columns.It is recommended that this standard be used on a regular basis for evaluation of column and system performance.

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The Preparative Chromatography Mix Standard is a specially formulated mix for the preparative or purification system. The Preparative Chromatography Mix Standard allows the user to evaluate and benchmark their chromatography prep or purification system with UV or MS before analysis of critical material. The Preparative Chromatography Standard includes a void marker, neutral, acidic and basic compounds. It can be used with a variety of column chemistries and dimensions, and system hardware.

The Quad LCMS QC Reference Material is designed for use with any chromatographic systems containing a Quad MS such as the SQD, TQD, Xevo TQ. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide: confidence in your results, reduce troubleshooting and re-run time, and enable cross lab result comparisons. It is adaptable to a wide variety of separation methods. 

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Phosphorylase b Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoACQUITY^® and Q-Tof™ based systems. 

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ Protein Digestion Standard Kit combines 5 of our very popular digestion standards in one package. The MassPREP™ Protein Digestion Standards are useful in a variety of applications that include performance evaluation of HPLC and UPLC^® Columns and systems as well as mass spectrometry instrumentation.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure in lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ Protein Digestion Standard Mix 1 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a relatively close equimolar ratio of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The MassPREP™ E.Coli Digestion Standard is part of a line of qualitative digestion standards and provides a complex biological matrix for proteomic evaluations using LC-MS, specifically Waters Protein Expression System.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ ADH Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Protein Digestion Standard Kit combines 5 of our very popular digestion standards in one package. The MassPREP™ Protein Digestion Standards are useful in a variety of applications that include performance evaluation of HPLC and UPLC^® Columns and systems as well as mass spectrometry instrumentation.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure in lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ ADH Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Protein Digestion Standard Kit combines 5 of our very popular digestion standards in one package. The MassPREP™ Protein Digestion Standards are useful in a variety of applications that include performance evaluation of HPLC and UPLC^® Columns and systems as well as mass spectrometry instrumentation.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure in lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ Protein Digestion Standard Mix 1 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a relatively close equimolar ratio of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The MassPREP™ E.Coli Digestion Standard is part of a line of qualitative digestion standards and provides a complex biological matrix for proteomic evaluations using LC-MS, specifically Waters Protein Expression System.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Phosphorylase b Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoACQUITY^® and Q-Tof™ based systems. 

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ Bovine Hemoglobin Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoACQUITY^® and Q-Tof™ based systems. 

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ ADH Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ BSA Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and Q-Tof™ based systems.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Phosphorylase b Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoACQUITY^® and Q-Tof™ based systems. 

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ ADH Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ BSA Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and Q-Tof™ based systems.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Protein Digestion Standard Mix 2 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a range of molar ratios of tryptically digested proteins for more in-depth anaylsis. This standard mix consists of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Phosphorylase b Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoACQUITY^® and Q-Tof™ based systems. 

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ ADH Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ BSA Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and Q-Tof™ based systems.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Protein Digestion Standard Mix 1 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a relatively close equimolar ratio of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ ADH Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ BSA Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and Q-Tof™ based systems.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Protein Digestion Standard Mix 1 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a relatively close equimolar ratio of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The MassPREP™ Protein Digestion Standard Mix 2 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a range of molar ratios of tryptically digested proteins for more in-depth anaylsis. This standard mix consists of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The MassPREP™ Phosphopeptide Standard Enolase provides a purified set of synthetic phosphopeptides used to optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses. This standard can be spiked into more complex samples for application-specific optimization to enable greater control over sample preparation, with the option to use pure peptides or to define phosphopeptide to unmodified peptide ratio.

The MassPREP™ Enolase Digest Phosphopeptide Mix is a complex sample mixture used to optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses. Using this standard, scientists have greater control over sample preparation, with the option to use pure peptides or to define phosphopeptide to unmodified peptide ratio.

The MassPREP™ Phosphopeptide Kit contains one piece of MassPREP Enolase Digest and one piece of MassPREP Phosphopeptide Standard Enolase which contains 4 Yeast Enolase derived phosphorylated peptides; T18p, T19p, T43p, T43pp. 

This kit allows maximum flexibility for mixing a complex sample spiked with a known mixture of phospotylated peptides to help optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses.

The MassPREP™ Phosphopeptide Enrichment Kit was developed for selective enrichment of phosphopeptides from complex samples. In contrast to currently popular immobilized metal affinity chromatography (IMAC) technology, this isolation method dos not require pre-loading the sorbent with a metal chelator.

The MassPREP™ Phosphopeptide Standard Enolase provides a purified set of synthetic phosphopeptides used to optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses. This standard can be spiked into more complex samples for application-specific optimization to enable greater control over sample preparation, with the option to use pure peptides or to define phosphopeptide to unmodified peptide ratio.

The MassPREP™ Phosphopeptide Kit contains one piece of MassPREP Enolase Digest and one piece of MassPREP Phosphopeptide Standard Enolase which contains 4 Yeast Enolase derived phosphorylated peptides; T18p, T19p, T43p, T43pp. 

This kit allows maximum flexibility for mixing a complex sample spiked with a known mixture of phospotylated peptides to help optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses.

The MassPREP™ Phosphopeptide Enrichment Kit was developed for selective enrichment of phosphopeptides from complex samples. In contrast to currently popular immobilized metal affinity chromatography (IMAC) technology, this isolation method dos not require pre-loading the sorbent with a metal chelator.

The MassPREP™ ADH Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ BSA Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and Q-Tof™ based systems.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Protein Digestion Standard Kit combines 5 of our very popular digestion standards in one package. The MassPREP™ Protein Digestion Standards are useful in a variety of applications that include performance evaluation of HPLC and UPLC^® Columns and systems as well as mass spectrometry instrumentation.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure in lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ Protein Digestion Standard Mix 1 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a relatively close equimolar ratio of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The MassPREP™ E.Coli Digestion Standard is part of a line of qualitative digestion standards and provides a complex biological matrix for proteomic evaluations using LC-MS, specifically Waters Protein Expression System.

The MassPREP™ Phosphopeptide Kit contains one piece of MassPREP Enolase Digest and one piece of MassPREP Phosphopeptide Standard Enolase which contains 4 Yeast Enolase derived phosphorylated peptides; T18p, T19p, T43p, T43pp. 

This kit allows maximum flexibility for mixing a complex sample spiked with a known mixture of phospotylated peptides to help optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Peptide Mixture is a qualititative standard useful for the evaluation and troubleshooting of HPLC and UPLC^® Columns and systems dedicated for peptide separations. The mixture contains a void volume marker and nine carefully selected peptides with a broad range of polarities and isoelectric points. All of the peptide peaks are easily resolved under gradient conditions typically used for peptide separations. The MassPREP™ Peptide Mixture 5 pack contains 5 vials.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Peptide Mixture is a qualititative standard useful for the evaluation and troubleshooting of HPLC and UPLC^® Columns and systems dedicated for peptide separations. The mixture contains a void volume marker and nine carefully selected peptides with a broad range of polarities and isoelectric points. All of the peptide peaks are easily resolved under gradient conditions typically used for peptide separations. A single vial of MassPREP Peptide Mixture is provided.

The MassPREP™ Phosphopeptide Standard Enolase provides a purified set of synthetic phosphopeptides used to optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses. This standard can be spiked into more complex samples for application-specific optimization to enable greater control over sample preparation, with the option to use pure peptides or to define phosphopeptide to unmodified peptide ratio.

The MassPREP™ Enolase Digest Phosphopeptide Mix is a complex sample mixture used to optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses. Using this standard, scientists have greater control over sample preparation, with the option to use pure peptides or to define phosphopeptide to unmodified peptide ratio.

The MassPREP™ Phosphopeptide Kit contains one piece of MassPREP Enolase Digest and one piece of MassPREP Phosphopeptide Standard Enolase which contains 4 Yeast Enolase derived phosphorylated peptides; T18p, T19p, T43p, T43pp. 

This kit allows maximum flexibility for mixing a complex sample spiked with a known mixture of phospotylated peptides to help optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses.

The Waters MassPREP™ Enhancer is a key component in the method used in the MassPREP Phosphopeptide Enrichment Kit, for the enhancement of phosphopeptide recovery and yields superior selectivity of the sorbent towards phosphopeptides. This standard is packed as a 5 pack and contains 500 mg per vial.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Phosphopeptide Standard Enolase provides a purified set of synthetic phosphopeptides used to optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses. This standard can be spiked into more complex samples for application-specific optimization to enable greater control over sample preparation, with the option to use pure peptides or to define phosphopeptide to unmodified peptide ratio.

The MassPREP™ Enolase Digest Phosphopeptide Mix is a complex sample mixture used to optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses. Using this standard, scientists have greater control over sample preparation, with the option to use pure peptides or to define phosphopeptide to unmodified peptide ratio.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Phosphopeptide Kit contains one piece of MassPREP Enolase Digest and one piece of MassPREP Phosphopeptide Standard Enolase which contains 4 Yeast Enolase derived phosphorylated peptides; T18p, T19p, T43p, T43pp. 

This kit allows maximum flexibility for mixing a complex sample spiked with a known mixture of phospotylated peptides to help optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses.

The MassPREP™ Phosphopeptide Enrichment Kit was developed for selective enrichment of phosphopeptides from complex samples. In contrast to currently popular immobilized metal affinity chromatography (IMAC) technology, this isolation method dos not require pre-loading the sorbent with a metal chelator.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ ADH Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Protein Digestion Standard Kit combines 5 of our very popular digestion standards in one package. The MassPREP™ Protein Digestion Standards are useful in a variety of applications that include performance evaluation of HPLC and UPLC^® Columns and systems as well as mass spectrometry instrumentation.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure in lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ Protein Digestion Standard Mix 1 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a relatively close equimolar ratio of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The Hi3 Phos B standard is a quantitative standard primarily intended for use with the Hi3 quantification method for MS^E proteomics data processed with ProteinLynx Global Server for samples of microbial origin. It may also used in the evaluation and benchmarking of proteomic LC-MS systems comprised of nanoACQUITY^® UPLC^® and Synapt^® and Xevo^® time-of-flight mass spectrometers.

The Hi3 Phos B standard is intended for samples of microbial origin. It is comprised of the top 6 ionizing peptides in the rabbit Phosphorylase B protein.

The BEH200 SEC Protein Standard Mix is used for benchmarking the ACQUITY UPLC Protein BEH SEC 200, 1.7 µm Columns. This standard should be used on a regular basis for evaluation of column and system performance.

The BEH125 SEC Protein Standard Mix is used to benchmark the ACQUITY UPLC Protein BEH SEC 125, 1.7 µm Columns. This standard should be used on a regular basis for evaluation of column and system performance.

The BEH450 SEC Protein Standard Mix is used to benchmark the ACQUITY UPLC Protein BEH SEC 450, 2.5 µm Columns.It is recommended that this standard be used on a regular basis for evaluation of column and system performance.

The Analgesics Mix is a specialty standard developed to aid in the transfer of HPLC to UPLC methods and provides a benchmark for the system once the transfer is completed. This mix is composed of seven specifically chosen compounds that are resolved well and provide a good representative span of the chromatographic range. This mix is not only valuable to use as a validation standard for initial method transfer, it also provides the additional benefit of establishing a baseline chromatogram for the system. Therefore, it is recommended to run this mix on a regular basis after the initial method setup to continually check and compare the original benchmark chromatogram for system performance.

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response.

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. 

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With just 3 easy steps in 30 minutes, the GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sample preparation. RapiFluor-MS’s unique chemical attributes provide increased fluorescence quantification and supreme mass spectral response. Now you can use a single label that provides valuable information from characterization to routine monitoring. Glycan analysis just got easier and more sensitive.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The SQD Standards Kit for SQD system assessment. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The Pico•Tag® Reagent Kit for Physiologic Amino Acid Analysis is used for HPLC analysis of physiologic amino acids. This reagent kit contains PITC, TEA and standards (acidic, basic, and neutral standards) and is sold as a refill for use with the Pico•Tag Free Amino Acid Chemistry Package.

The Pico•Tag® Eluent 2 is used for HPLC analysis of physiologic amino acids. This aqueous buffer is packaged as a component of the Pico•Tag Chemistry Kit. A single 1 L bottle of eluent is provided.

The Pico•Tag® Eluent A is an aqueous buffer used as a mobile phase for HPLC separation of amino acids with the Pico•Tag method. Four 1 L bottles are provided.

The Pico•Tag® Diluent is used for reconstituting dried derivatized samples prior to HPLC analysis using the Pico•Tag method.

The Pico•Tag® Eluent A is an aqueous buffer used as a mobile phase for HPLC separation of amino acids with the Pico•Tag method. Four 1 L bottles are provided.

The Pico•Tag® Eluent B is an organic buffer used as a mobile phase for HPLC separation of amino acids with the Pico•Tag method. Four 1 L bottles are provided.

The Pico•Tag® Diluent is used for reconstituting dried derivatized samples prior to HPLC analysis using the Pico•Tag method.

The Pico•Tag Reagent Kit for Protein Hydrolysates is used for HPLC analysis of protein hydrolysates. This reagent kit contains PITC, TEA and standards (acidic, basic, and neutral standards) and is sold as a refill for use with the Pico•Tag Chemistry Package for Protein Hydrolysates.