Waters Analytical Standards & Reagents

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The ACQUITY UPLC/UV Qualification Standards Kit is intended for performing system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10-mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY UPLC/UV Start Up Standards Kit is intended to perform system precision and gradient performance tests on an ACQUITY UPLC System with a UV detector.

The AquaAnalysis System Start up Solution intended to be used during installation and to assess the performance of the AquaAnalysis System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The Refractive Index Performance and Operation Solution is intended for use with refractive index (RI) detectors such as the 2414, 2410, or 410 with HPLC systems (modular or Alliance systems). It is used to test the sensitivity, reproducibility, and linearity of the refractive index detector. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The Refractive Index Performance and Operation Solution is intended for use with refractive index (RI) detectors such as the 2414, 2410, or 410 with HPLC systems (modular or Alliance systems). It is used to test the sensitivity, reproducibility, and linearity of the refractive index detector. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY Arc Refractive Index Detector Solution is intended for use with refractive index (RI) detectors with ACQUITY Arc Systems. It is used to test the sensitivity, reproducibility, and linearity of the refractive index detector. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license. 

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The ACQUITY UPLC/UV Qualification Standards Kit is intended for performing system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10-mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY UPLC/UV Start Up Standards Kit is intended to perform system precision and gradient performance tests on an ACQUITY UPLC System with a UV detector.

The AquaAnalysis System Start up Solution intended to be used during installation and to assess the performance of the AquaAnalysis System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY Arc Absorb 10 mm Cell Test Solution is used to perform system-level performance qualification on an ACQUITY  Arc System with TUV or PDA detectors, using the standard 10 mm flow cell configuration. This kit can be used to perform system precision, detector wavelength accuracy, detector linearity and sensitivity, gradient performance, carryover, injector linearity and accuracy, flow rate linearity, and sample positioning and detector noise.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The MS Qualification Standards Kit is intended to be used in the operational qualification of several MS's such as the Q-Micro and ZQ. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY UPLC/UV Qualification Standards Kit is intended for performing system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10-mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY UPLC^® Absorb 10mm Cell Test Solution is used to perform system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10 mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self-directed qualification training and license.  

Please contact your local office for more information on certification and training service. 

The product can replace part number 700002642 if propiophenone is not required.

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The ACQUITY UPLC^® Absorb 10mm Cell Test Solution is used to perform system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10 mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self-directed qualification training and license.  

Please contact your local office for more information on certification and training service. 

The product can replace part number 700002642 if propiophenone is not required.

The ACQUITY UPLC Absorb Start-up Solution is used to perform system performance tests on the ACQUITY UPLC System with TUV or PDA detectors. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license. This kit can replace part number 700002669 if propiophenone is not required.

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The ACQUITY UPLC^® Absorb 10mm Cell Test Solution is used to perform system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10 mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self-directed qualification training and license.  

Please contact your local office for more information on certification and training service. 

The product can replace part number 700002642 if propiophenone is not required.

The ACQUITY UPLC/UV Qualification Standards Kit is intended for performing system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10-mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY UPLC/UV Start Up Standards Kit is intended to perform system precision and gradient performance tests on an ACQUITY UPLC System with a UV detector.

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The ACQUITY UPLC/UV Qualification Standards Kit is intended for performing system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10-mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The TQD/Q-Premier/XE/Q-Micro Qualification Standards Test Kit is intended to be used to perform system-level performance qualification on a TQD, Q-Premier, XE or Q-Micro. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The HPLC HT with UV Standards Kit is intended to be used in the performance qualification of an Alliance^® HT (High Throughput) 2795 system with UV or PDA detection. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The MS SOLUTION, FORMIC ACID is intended to be used as a modifier in MS solvents.

The Reserpine Kit is a daily use stock solution standard that should be used to optimize tune parameters and signal of your Triple Quad or Single Quad MS. The working solution can be used daily to perform ESI positive sensitivity testing.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Qualification Standards Kit is intended to be used in the operational qualification of several MS's such as the Q-Micro and ZQ. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY UPLC/UV Qualification Standards Kit is intended for performing system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10-mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Qualification Standards Kit is intended to be used in the operational qualification of several MS's such as the Q-Micro and ZQ. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY UPLC/UV Qualification Standards Kit is intended for performing system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10-mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Preparative Chromatography Mix Standard is a specially formulated mix for the preparative or purification system. The Preparative Chromatography Mix Standard allows the user to evaluate and benchmark their chromatography prep or purification system with UV or MS before analysis of critical material. The Preparative Chromatography Standard includes a void marker, neutral, acidic and basic compounds. It can be used with a variety of column chemistries and dimensions, and system hardware.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The Resolution Check on all GC-MS products is intended to check the resolution and for routine use with a GC-MS systems. For all MS Users who need to get their system calibrated and working. This product is a ready to use standard calibrator to be use daily.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The Calibration on AutoSpec only standard is used to calibrate the AutoSpec MS system as described in the operator guide. The Calibration on AutoSpec only standard is a ready-to-use standard calibrator that is easy to use and specially formulated for your MS. 

The Gradient Valve Standard is intended to be used to assess the performance of the Alliance Gradient Proportioning Valve.

The UV Detector Linearity Standards Kit is designed for linearity testing of UV detectors with a 10 mm flow cell using 10 cc safety syringe to manually deliver the standards into the flow cell. The kit can also be used with cuvettes for Operational Qualification of Waters HPLC TUV and PDA detectors, such as the 2487, 996, 2996, 2489, or 2998. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Wavelength Accuracy Kit (Erbium Perchlorate) is used to perform Operational Qualification procedures for wavelength accuracy on HPLC TUV/PDA detectors such as the 2487, 996, 2996, 2489, and 2998 using either cuvettes or via manual delivery with a 10 cc safety syringe. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Resolution Check on all GC-MS products is intended to check the resolution and for routine use with a GC-MS systems. For all MS Users who need to get their system calibrated and working. This product is a ready to use standard calibrator to be use daily.

The CI optimization on GCTs only is to be used to optimize the chemical ionization signal and tuning of the GCT/MS system. For all MS users who need to get their system calibrated and working quickly. The CI optimization on GCTs only is a ready to use standard calibrator that is easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The MS Qualification Standards Kit is intended to be used in the operational qualification of several MS's such as the Q-Micro and ZQ. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY UPLC/UV Qualification Standards Kit is intended for performing system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10-mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Atmospheric Pressure Photoionization Test Solution used to set up and assess the the MS system doing APPI. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Resolution Check on all GC-MS products is intended to check the resolution and for routine use with a GC-MS systems. For all MS Users who need to get their system calibrated and working. This product is a ready to use standard calibrator to be use daily.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The FI optimization on GCTs only standard is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The FI optimization on GCTs only standard is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The Resolution Check on all GC-MS products is intended to check the resolution and for routine use with a GC-MS systems. For all MS Users who need to get their system calibrated and working. This product is a ready to use standard calibrator to be use daily.

The CI optimization on GCTs only is to be used to optimize the chemical ionization signal and tuning of the GCT/MS system. For all MS users who need to get their system calibrated and working quickly. The CI optimization on GCTs only is a ready to use standard calibrator that is easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The FI optimization on GCTs only standard is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The FI optimization on GCTs only standard is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The 20 Pesticide Standard Mix is intended for use with the Waters Pesticide Screening Application Solution with UNIFI. This application prepares laboratories to test more food and environmental samples for increasing numbers of residues and contaminants not just at, but below, regulatory limits. The Waters Pesticide Screening Application Solution is custom-built to minimize both false-positive (non-compliant) and false negative (compliant) findings. Now, for the first time, scientists will be able to reliably report the presence or absence of pesticide residues, easily streamline workflows, and increase the speed of analysis of complex matrices.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The LC Multiresidue Pesticide Standards Kit is a fit-for-purpose collection of 204 compounds designed to eliminate the need for sourcing individual pesticide standards and measure each one manually.

The Resolution Check on all GC-MS products is intended to check the resolution and for routine use with a GC-MS systems. For all MS Users who need to get their system calibrated and working. This product is a ready to use standard calibrator to be use daily.

The CI optimization on GCTs only is to be used to optimize the chemical ionization signal and tuning of the GCT/MS system. For all MS users who need to get their system calibrated and working quickly. The CI optimization on GCTs only is a ready to use standard calibrator that is easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The GC Performance Standard is intended to be used for GC system performance assessment. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The GCT Premier(EI,CI,DCI,SIP) Standards Kit is intended to assess the performance of the GCT Premier. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The GCT Premier (FI, FD) Standards Kit for GCT Premier system assessment. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The GC Qualification Standards Kit is intended to be used to qualify GC systems on Empower^®. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The GC Qualification Standards Kit is intended to be used to qualify GC systems on Empower^®. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The GC Headspace Qualification Standards Kit is intended to be used to qualify GC Headspace systems on Empower^®. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The GC Performance Standard is intended to be used for GC system performance assessment. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The GCT Premier(EI,CI,DCI,SIP) Standards Kit is intended to assess the performance of the GCT Premier. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The GCT Premier (FI, FD) Standards Kit for GCT Premier system assessment. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The GC Headspace Qualification Standards Kit is intended to be used to qualify GC Headspace systems on Empower^®. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Resolution Check on all GC-MS products is intended to check the resolution and for routine use with a GC-MS systems. For all MS Users who need to get their system calibrated and working. This product is a ready to use standard calibrator to be use daily.

The CI optimization on GCTs only is to be used to optimize the chemical ionization signal and tuning of the GCT/MS system. For all MS users who need to get their system calibrated and working quickly. The CI optimization on GCTs only is a ready to use standard calibrator that is easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The FI optimization on GCTs only standard is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The FI optimization on GCTs only standard is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The Resolution Check on all GC-MS products is intended to check the resolution and for routine use with a GC-MS systems. For all MS Users who need to get their system calibrated and working. This product is a ready to use standard calibrator to be use daily.

The CI optimization on GCTs only is to be used to optimize the chemical ionization signal and tuning of the GCT/MS system. For all MS users who need to get their system calibrated and working quickly. The CI optimization on GCTs only is a ready to use standard calibrator that is easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The FI optimization on GCTs only standard is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The FI optimization on GCTs only standard is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The UV Detector Linearity Standards Kit is designed for linearity testing of UV detectors with a 10 mm flow cell using 10 cc safety syringe to manually deliver the standards into the flow cell. The kit can also be used with cuvettes for Operational Qualification of Waters HPLC TUV and PDA detectors, such as the 2487, 996, 2996, 2489, or 2998. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Wavelength Accuracy Kit (Erbium Perchlorate) is used to perform Operational Qualification procedures for wavelength accuracy on HPLC TUV/PDA detectors such as the 2487, 996, 2996, 2489, and 2998 using either cuvettes or via manual delivery with a 10 cc safety syringe. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Detector PQ Standard Kit contains standards appropriate for assessment of HPLC UV systems. This includes area, height and retention time reproducibility, and injector linearity. The UV Detector PQ Standard Kit should be used as a performance standard to assess system performance with a 4 compound separation. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Leucine Enkephalin Kit is intended for use when setting up the Time of Flight MS detector.

The [Glu1]-Fibrinopeptide B Standard is intended to be used for mass scale calibration and as a lock mass standard in an easy to use format.

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The Alliance HT Qualification Standards Kit is used for Alliance HT 2795 with UV/PDA detection qualification. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

The HPLC with UV Standards Kit is intended to be used in the performance qualification of an Alliance^® 2695 system with UV or PDA detection. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The Preparative Chromatography Mix Standard is a specially formulated mix for the preparative or purification system. The Preparative Chromatography Mix Standard allows the user to evaluate and benchmark their chromatography prep or purification system with UV or MS before analysis of critical material. The Preparative Chromatography Standard includes a void marker, neutral, acidic and basic compounds. It can be used with a variety of column chemistries and dimensions, and system hardware.

The Gradient Valve Standard is intended to be used to assess the performance of the Alliance Gradient Proportioning Valve.

The UV Wavelength Accuracy Kit (Erbium Perchlorate) is used to perform Operational Qualification procedures for wavelength accuracy on HPLC TUV/PDA detectors such as the 2487, 996, 2996, 2489, and 2998 using either cuvettes or via manual delivery with a 10 cc safety syringe. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Alliance HT Qualification Standards Kit is used for Alliance HT 2795 with UV/PDA detection qualification. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

The HPLC HT with UV Standards Kit is intended to be used in the performance qualification of an Alliance^® HT (High Throughput) 2795 system with UV or PDA detection. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UPC^2® Standards Kit combines the UPC² Gradient Standard Mix and the UPC² Caffeine Standard products. Use the standard mixtue to assess UPC² System. Separation details can be obtained from the installation method and project.

The UPC² Standard Ibuprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Ketoprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The Xevo^®TQ Standards Kit intended to calibrate and qualify the Xevo TQ System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Xevo TQ-S Qualification Standards Kit is intended to qualify the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UPC² Standard Mix is intended for use with the Waters ACQUITY UPC system. This four compound mix can be used to assess system performance and reproducibility.

The UPC² Standard Ibuprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Ketoprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The Preparative Chromatography Mix Standard is a specially formulated mix for the preparative or purification system. The Preparative Chromatography Mix Standard allows the user to evaluate and benchmark their chromatography prep or purification system with UV or MS before analysis of critical material. The Preparative Chromatography Standard includes a void marker, neutral, acidic and basic compounds. It can be used with a variety of column chemistries and dimensions, and system hardware.

The Quad LCMS QC Reference Material is designed for use with any chromatographic systems containing a Quad MS such as the SQD, TQD, Xevo TQ. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide: confidence in your results, reduce troubleshooting and re-run time, and enable cross lab result comparisons. It is adaptable to a wide variety of separation methods. 

The MS Leucine Enkephalin Kit is intended for use when setting up the Time of Flight MS detector.

The [Glu1]-Fibrinopeptide B Standard is intended to be used for mass scale calibration and as a lock mass standard in an easy to use format.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The Quad LCMS QC Reference Material is designed for use with any chromatographic systems containing a Quad MS such as the SQD, TQD, Xevo TQ. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide: confidence in your results, reduce troubleshooting and re-run time, and enable cross lab result comparisons. It is adaptable to a wide variety of separation methods. 

The [Glu1]-Fibrinopeptide B Standard is intended to be used for mass scale calibration and as a lock mass standard in an easy to use format.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Leucine Enkephalin Kit is intended for use when setting up the Time of Flight MS detector.

The [Glu1]-Fibrinopeptide B Standard is intended to be used for mass scale calibration and as a lock mass standard in an easy to use format.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Phosphorylase b Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoACQUITY^® and Q-Tof™ based systems. 

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ Protein Digestion Standard Kit combines 5 of our very popular digestion standards in one package. The MassPREP™ Protein Digestion Standards are useful in a variety of applications that include performance evaluation of HPLC and UPLC^® Columns and systems as well as mass spectrometry instrumentation.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure in lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ Protein Digestion Standard Mix 1 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a relatively close equimolar ratio of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The MassPREP™ E.Coli Digestion Standard is part of a line of qualitative digestion standards and provides a complex biological matrix for proteomic evaluations using LC-MS, specifically Waters Protein Expression System.

The MassPREP™ ADH Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ BSA Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and Q-Tof™ based systems.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Protein Digestion Standard Kit combines 5 of our very popular digestion standards in one package. The MassPREP™ Protein Digestion Standards are useful in a variety of applications that include performance evaluation of HPLC and UPLC^® Columns and systems as well as mass spectrometry instrumentation.

Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure in lot reproducibility. The resulting protein digest contains no undigested protein, trypsin, or other hydrophilic components.

The MassPREP™ Protein Digestion Standard Mix 1 is a qualitative standard that provides high confidence and coverage during expression profiling of complex protein samples. This standard is used for verification of Waters PLGS software and consists of a relatively close equimolar ratio of yeast enolase, phosphorylase B, yeast alcohol dehydrogenase (ADH), and bovine serum albumin (BSA), which have all been tryptically digested.

The MassPREP™ E.Coli Digestion Standard is part of a line of qualitative digestion standards and provides a complex biological matrix for proteomic evaluations using LC-MS, specifically Waters Protein Expression System.

The MassPREP™ Phosphopeptide Kit contains one piece of MassPREP Enolase Digest and one piece of MassPREP Phosphopeptide Standard Enolase which contains 4 Yeast Enolase derived phosphorylated peptides; T18p, T19p, T43p, T43pp. 

This kit allows maximum flexibility for mixing a complex sample spiked with a known mixture of phospotylated peptides to help optimize phosphopeptide detection in LC-MS, LC-UV and MALDI-MS analyses.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The MS Set Up Solution, Atmospheric Pressure Ionization is intended to be used for Mass Spec Set up. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.   Note that many of the compounds are concentrated and should be diluted for use with the Xevo^®series, or even the SQD.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Set Up Solution, Atmospheric Pressure Ionization is intended to be used for Mass Spec Set up. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.   Note that many of the compounds are concentrated and should be diluted for use with the Xevo^®series, or even the SQD.

The Xevo TQ-S Qualification Standards Kit is intended to qualify the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS ETD Standards Kit is used to assess electron transfer dissociation on the Synapt^® G2 and G2-S. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS ETD Reagent Kit is The MS ETD Standards Kit is used to assess electron transfer dissociation on the Synapt^® G2 and G2-S. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The Mass Scale and Resolution Set Up Solution is intended to be used to calibrate the mass scale and resultion of your MS. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The [Glu1]-Fibrinopeptide B Standard is intended to be used for mass scale calibration and as a lock mass standard in an easy to use format.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Solution - Daidzein (250 μg/L) is used to assess signal to noise on triple quad systems. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Reserpine Kit is a daily use stock solution standard that should be used to optimize tune parameters and signal of your Triple Quad or Single Quad MS. The working solution can be used daily to perform ESI positive sensitivity testing.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The Mass Scale and Resolution Set Up Solution is intended to be used to calibrate the mass scale and resultion of your MS. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The [Glu1]-Fibrinopeptide B Standard is intended to be used for mass scale calibration and as a lock mass standard in an easy to use format.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Xevo TQ-S Qualification Standards Kit is intended to qualify the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Qualification Standards Kit is intended to be used in the operational qualification of several MS's such as the Q-Micro and ZQ. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Qualification Standards Kit is intended to be used in the operational qualification of several MS's such as the Q-Micro and ZQ. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The SQD Standards Kit for SQD system assessment. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 4 buffer is used to calibrate a pH meter to pH 4 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 7 buffer is used to calibrate a pH meter to pH 7 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains (a pint) 473 mL. This product is accredited to ISO Guide 34.

The pH 10 buffer is used to calibrate a pH meter to pH 10 at 25 °C. The buffer is directly traceable to an SI unit via NIST SRMs and contains 1000 mL. This product is accredited to ISO Guide 34.

The UPC² Standard Mix is intended for use with the Waters ACQUITY UPC system. This four compound mix can be used to assess system performance and reproducibility.

The UPC² Standard Ibuprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Ketoprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

Ibuprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC2^® System or SFC system as well as verify performance of the instrument. 

The AutoPurification System Standard allows the user to evaluate and benchmark the performance of an AutoPurification/Preparative System through fraction collection before analysis of critical material. This Quality Control Reference Material is specially formulated to allow the user to verify correct fraction collection. The test is highly valuable when performed at first use/installation, and any time the system has not been used or has had any changes.

The MS Leucine Enkephalin Kit is intended for use when setting up the Time of Flight MS detector.

The MS Calibration Reference Standard - PEG 400 is intended to be used for mass calibration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The [Glu1]-Fibrinopeptide B Standard is intended to be used for mass scale calibration and as a lock mass standard in an easy to use format.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Leucine Enkephalin Kit is intended for use when setting up the Time of Flight MS detector.

The [Glu1]-Fibrinopeptide B Standard is intended to be used for mass scale calibration and as a lock mass standard in an easy to use format.

The MassPREP™ Enolase Digestion Standard is part of a line of qualitative digestion standards used for performance evaluation of HPLC, UPLC^® Columns and LC-MS instrumentation. It is especially useful in positive ion mode evaluations for sensitivity, resolution, and mass measurement accuracy on nanoAcquity and QToF™ based systems. Each digestion standard is batch manufactured with high-grade quality digestion materials and enzymes and is subsequently purified and quality control tested to ensure intra-lot reproducibility.

The MassPREP™ Peptide Mixture is a qualititative standard useful for the evaluation and troubleshooting of HPLC and UPLC^® Columns and systems dedicated for peptide separations. The mixture contains a void volume marker and nine carefully selected peptides with a broad range of polarities and isoelectric points. All of the peptide peaks are easily resolved under gradient conditions typically used for peptide separations. A single vial of MassPREP Peptide Mixture is provided.

The Resolution Check on all GC-MS products is intended to check the resolution and for routine use with a GC-MS systems. For all MS Users who need to get their system calibrated and working. This product is a ready to use standard calibrator to be use daily.

The CI optimization on GCTs only is to be used to optimize the chemical ionization signal and tuning of the GCT/MS system. For all MS users who need to get their system calibrated and working quickly. The CI optimization on GCTs only is a ready to use standard calibrator that is easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The FI optimization on GCTs only standard is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The FI optimization on GCTs only standard is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Xevo TQ-S Qualification Standards Kit is intended to qualify the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The CI optimization on GCTs only is to be used to optimize the chemical ionization signal and tuning of the GCT/MS system. For all MS users who need to get their system calibrated and working quickly. The CI optimization on GCTs only is a ready to use standard calibrator that is easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The FI optimization on GCTs only standard is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The FI optimization on GCTs only standard is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The System Evaluation Matrix #1 is intended for use as a reproducible background signal in the evaluation of LC and MS system performance. It is especially suitable for standard small molecule applications where a complicated matrix is required but naturally occurring alternatives, such as urine and plasma, are impractical.

The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods. 

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The HPLC UV Linearity Solutions for Analytical Flow Cells kit is used for Alliance^® 2695 with UV/PDA detection qualification. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Two Cuvette Kit (empty) is intended to be used with a UV detector containing a cuvette option.

The UV Detector Linearity Standards Kit is designed for linearity testing of UV detectors with a 10 mm flow cell using 10 cc safety syringe to manually deliver the standards into the flow cell. The kit can also be used with cuvettes for Operational Qualification of Waters HPLC TUV and PDA detectors, such as the 2487, 996, 2996, 2489, or 2998. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Detector PQ Standard Kit contains standards appropriate for assessment of HPLC UV systems. This includes area, height and retention time reproducibility, and injector linearity. The UV Detector PQ Standard Kit should be used as a performance standard to assess system performance with a 4 compound separation. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Tuning Solution/Gradient Performance, Sensitivity and Precision is intended to be used to perform tuning, gradient performance sensititivty and precision testing. The mix can be used on a daily basis. It comes in a 25 mL screw-on infusion container.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The SQD Standards Kit for SQD system assessment. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Tuning Solution/Gradient Performance, Sensitivity and Precision is intended to be used to perform tuning, gradient performance sensititivty and precision testing. The mix can be used on a daily basis. It comes in a 25 mL screw-on infusion container.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Qualification Standards Kit is intended to be used in the operational qualification of several MS's such as the Q-Micro and ZQ. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY MS Test Solutions is intended for performing operational and performance qualification on an ACQUITY System with a single or triple quadrupole MS instruments, such as the SQD and TQD. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The SQD Set Up Solution is used as the set up solutions for single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Reserpine Kit is a daily use stock solution standard that should be used to optimize tune parameters and signal of your Triple Quad or Single Quad MS. The working solution can be used daily to perform ESI positive sensitivity testing.

The Six Cuvette set is intended to be used with a UV detector containing a cuvette option.

The UV Detector Linearity Standards Kit is designed for linearity testing of UV detectors with a 10 mm flow cell using 10 cc safety syringe to manually deliver the standards into the flow cell. The kit can also be used with cuvettes for Operational Qualification of Waters HPLC TUV and PDA detectors, such as the 2487, 996, 2996, 2489, or 2998. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Wavelength Accuracy Kit (Erbium Perchlorate) is used to perform Operational Qualification procedures for wavelength accuracy on HPLC TUV/PDA detectors such as the 2487, 996, 2996, 2489, and 2998 using either cuvettes or via manual delivery with a 10 cc safety syringe. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Detector PQ Standard Kit contains standards appropriate for assessment of HPLC UV systems. This includes area, height and retention time reproducibility, and injector linearity. The UV Detector PQ Standard Kit should be used as a performance standard to assess system performance with a 4 compound separation. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UPC² Standard Mix is intended for use with the Waters ACQUITY UPC system. This four compound mix can be used to assess system performance and reproducibility.

The UPC² Standard Ibuprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Gradient Standard is intended to assess reproducibity of the ACQUITY UPC^2® System using a gradient separation. Separation details are obtained from the installation method and project. 

The UPC² Standard Mix is intended for use with the Waters ACQUITY UPC system. This four compound mix can be used to assess system performance and reproducibility.

The UPC² Standard Ibuprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Ketoprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Mix is intended for use with the Waters ACQUITY UPC system. This four compound mix can be used to assess system performance and reproducibility.

The UPC² Standard Ibuprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Ketoprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Mix is intended for use with the Waters ACQUITY UPC system. This four compound mix can be used to assess system performance and reproducibility.

The UPC² Standard Ibuprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Ketoprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Mix is intended for use with the Waters ACQUITY UPC system. This four compound mix can be used to assess system performance and reproducibility.

The UPC² Standard Ketoprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Flavone is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® or SFC system.

The UPC² Standard Mix is intended for use with the Waters ACQUITY UPC system. This four compound mix can be used to assess system performance and reproducibility.

The UPC² Standard Ibuprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Ibuprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Ketoprofen is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® System or SFC system.

The UPC² Standard Flavone is a single component standard which can be used to assess the reproducibility of your Waters ACQUITY UPC^2® or SFC system.

The Gradient Valve Standard is intended to be used to assess the performance of the Alliance Gradient Proportioning Valve.

The UV Wavelength Accuracy Kit (Erbium Perchlorate) is used to perform Operational Qualification procedures for wavelength accuracy on HPLC TUV/PDA detectors such as the 2487, 996, 2996, 2489, and 2998 using either cuvettes or via manual delivery with a 10 cc safety syringe. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Detector PQ Standard Kit contains standards appropriate for assessment of HPLC UV systems. This includes area, height and retention time reproducibility, and injector linearity. The UV Detector PQ Standard Kit should be used as a performance standard to assess system performance with a 4 compound separation. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Gradient Valve Standard is intended to be used to assess the performance of the Alliance Gradient Proportioning Valve.

The UV Wavelength Accuracy Kit (Erbium Perchlorate) is used to perform Operational Qualification procedures for wavelength accuracy on HPLC TUV/PDA detectors such as the 2487, 996, 2996, 2489, and 2998 using either cuvettes or via manual delivery with a 10 cc safety syringe. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Detector PQ Standard Kit contains standards appropriate for assessment of HPLC UV systems. This includes area, height and retention time reproducibility, and injector linearity. The UV Detector PQ Standard Kit should be used as a performance standard to assess system performance with a 4 compound separation. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Wavelength Accuracy kit if is used to perform Operational Qualification procedures for wavelength accuracy on UV detectors, such as the 486, 490, LC Module I. A 10 cc safety syringe is used to manually deliver the standards to the flow cell. you have certification or SOPs for system qualification. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Detector Linearity Standards Kit is designed for linearity testing of UV detectors with a 10 mm flow cell using 10 cc safety syringe to manually deliver the standards into the flow cell. The kit can also be used with cuvettes for Operational Qualification of Waters HPLC TUV and PDA detectors, such as the 2487, 996, 2996, 2489, or 2998. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Wavelength Accuracy Kit (Erbium Perchlorate) is used to perform Operational Qualification procedures for wavelength accuracy on HPLC TUV/PDA detectors such as the 2487, 996, 2996, 2489, and 2998 using either cuvettes or via manual delivery with a 10 cc safety syringe. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Wavelength Accuracy kit if is used to perform Operational Qualification procedures for wavelength accuracy on UV detectors, such as the 486, 490, LC Module I. A 10 cc safety syringe is used to manually deliver the standards to the flow cell. you have certification or SOPs for system qualification. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Detector Linearity Standards Kit is designed for linearity testing of UV detectors with a 10 mm flow cell using 10 cc safety syringe to manually deliver the standards into the flow cell. The kit can also be used with cuvettes for Operational Qualification of Waters HPLC TUV and PDA detectors, such as the 2487, 996, 2996, 2489, or 2998. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Detector PQ Standard Kit contains standards appropriate for assessment of HPLC UV systems. This includes area, height and retention time reproducibility, and injector linearity. The UV Detector PQ Standard Kit should be used as a performance standard to assess system performance with a 4 compound separation. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Detector Linearity Standards Kit is designed for linearity testing of UV detectors with a 10 mm flow cell using 10 cc safety syringe to manually deliver the standards into the flow cell. The kit can also be used with cuvettes for Operational Qualification of Waters HPLC TUV and PDA detectors, such as the 2487, 996, 2996, 2489, or 2998. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The UV Wavelength Accuracy Kit (Erbium Perchlorate) is used to perform Operational Qualification procedures for wavelength accuracy on HPLC TUV/PDA detectors such as the 2487, 996, 2996, 2489, and 2998 using either cuvettes or via manual delivery with a 10 cc safety syringe. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.