Preparative Chromatography Mix Standard [186006703]

  • Product
  • Documents
  • Columns & Vials
  • Systems

Preparative Chromatography Mix Standard [186006703]

The Preparative Chromatography Mix Standard is a specially formulated mix for the preparative or purification system. The Preparative Chromatography Mix Standard allows the user to evaluate and benchmark their chromatography prep or purification system with UV or MS before analysis of critical material. The Preparative Chromatography Standard includes a void marker, neutral, acidic and basic compounds. It can be used with a variety of column chemistries and dimensions, and system hardware.

The preparative chromatography mix contains:

  • 5 mg/mL each of Diclofenac sodium salt
  • Diphenhydramine hydrochloride
  • Flavone in DMSO, 1 mL in a Waters vial


Store at room temperature.

  • XBridge® BEH C18 OBD Prep Column, 130Å, 5 µm, 19 mm X 50 mm (186002977)
  • XTerra® MS C18 OBD Prep Column, 125Å, 5 µm, 19 mm X 50 mm (186001930)
  • LCMS Certified Vials (600000668CV)
  • TruView™ LCMS Certified Vials (186005666CV)

System Performance Standards Key

Set Up

Setup standards are used upon installation of a new system, start-up of a system which has been idle for a period of time, or to re-start a system that has been moved to a new location. These standards may include multiple components within a kit which allow step by step setup and calibration, or they can be single mixtures which will enable a full system assessment and initialization.


These standards can be used for instrument calibration. Calibration is usually performed at a frequency that minimizes the risk of being out of calibration, in addition to major events suc h as when the instrument is moved and upon any major repair. Calibration can be confirmed as often as your standard operating procedures recommend. Look for solutions to calibrate your MS mass accuracy and resolution, UV detector linearity, UV and Fluorescence detector wavelength accuracy, injector accuracy and precision, and solvent system flow rate accuracy.


Your system is comprised of many interdependent components working together. An issue with any one component can produce erroneous final results. All components performing correctly will produce results within an expected variability. Some of the system components include mobile phase, column, tubing, pumping, injecting, temperature controlling, detecting, data collection rate, and integration
parameters. An issue in any one of the components listed can affect your result.
Performance Check Standards should be utilized on a routine basis. This includes anytime a column is changed, a method is changed, the instrument is moved, or confirmation of system performance is desired. Confirming the performance of your system can be done on a system basis with suitability standards or per individual instrument component. Benchmark performance should be established after
calibration and confirmed regularly.


These Mass Spectrometry solutions are used routinely and are available for every ionization mode. Use the solution to optimize the mass spectrometer setting for optimal signal either manually or through Intellistart.


This product contains hazardous material which requires special freight handling. Additional charges may apply.

Have a Question?

Get Expert Advice!

Contact Us | Sales Offices

Related Product

AutoPurification System Standard [716000765]

The AutoPurification System Standard allows the user to evaluate and benchmark the performance ...

34 Maple Street Milford, MA USA
T: 508-478-2000
F: 508-872-1990
Sales Offices

© 2020 Waters Corporation
Terms and Conditions | Privacy Policy