Glycoprotein Performance Test Standard [186008010]

  • Product
  • Documents
  • Columns & Vials

Glycoprotein Performance Test Standard [186008010]

The Waters Glycoprotein Performance Test Standard is a formulation of a glycosylated and high mannose glycoforms of ribonuclease (RNase). It is intended for use as a material to condition and monitor the performance of ACQUITY UPLC Glycoprotein BEH Amide 300Å 1.7 μm Columns.

Reconstitute the contents of each vial with 25 μL of 0.1% TFA in 80% ACN. For conditioning a previously unused 2.1 mm I.D. ACQUITY UPLC Glycoprotein BEH Amide 300Å 1.7 μm Column, perform two sequential gradient separations of the standard injected at a volume of 10 μL. For benchmarking and monitoring the performance of a 2.1 mm I.D. ACQUITY UPLC Glycoprotein BEH Amide 300Å 1.7 μm Column, perform gradient separations of the standard injected at a volume of 0.5 μL.

This material should be stored in the original packaging at 4°C ± 2°C upon receipt.

ACQUITY UPLC Glycoprotein BEH Amide 300Å 1.7 μm columns

System Performance Standards Key

Set Up

Setup standards are used upon installation of a new system, start-up of a system which has been idle for a period of time, or to re-start a system that has been moved to a new location. These standards may include multiple components within a kit which allow step by step setup and calibration, or they can be single mixtures which will enable a full system assessment and initialization.


These standards can be used for instrument calibration. Calibration is usually performed at a frequency that minimizes the risk of being out of calibration, in addition to major events suc h as when the instrument is moved and upon any major repair. Calibration can be confirmed as often as your standard operating procedures recommend. Look for solutions to calibrate your MS mass accuracy and resolution, UV detector linearity, UV and Fluorescence detector wavelength accuracy, injector accuracy and precision, and solvent system flow rate accuracy.


Your system is comprised of many interdependent components working together. An issue with any one component can produce erroneous final results. All components performing correctly will produce results within an expected variability. Some of the system components include mobile phase, column, tubing, pumping, injecting, temperature controlling, detecting, data collection rate, and integration
parameters. An issue in any one of the components listed can affect your result.
Performance Check Standards should be utilized on a routine basis. This includes anytime a column is changed, a method is changed, the instrument is moved, or confirmation of system performance is desired. Confirming the performance of your system can be done on a system basis with suitability standards or per individual instrument component. Benchmark performance should be established after
calibration and confirmed regularly.


These Mass Spectrometry solutions are used routinely and are available for every ionization mode. Use the solution to optimize the mass spectrometer setting for optimal signal either manually or through Intellistart.


This product contains hazardous material which requires special freight handling. Additional charges may apply.

Have a Question?

Get Expert Advice!

Contact Us | Sales Offices

Related Product

GlycoWorks RapiFluor-MS N-Glycan Kit - 96 Samples [176003606]

The GlycoWorks RapiFluor-MS N-Glycan Kit reduces complicated, time-consuming sam ...

Related Product

GlycoWorks RapiFluor-MS N-Glycan Kit Starter Kit [176003635]

The GlycoWorks

Related Product

GlycoWorks RapiFluor-MS N-Glycan Kit - 24 Samples [176003712]

Re-imagine a streamlined, fast, and highly sensitive way to analyze released N-glycans. With j ...

34 Maple Street Milford, MA USA
T: 508-478-2000
F: 508-872-1990
Sales Offices

© 2019 Waters Corporation
Terms and Conditions | Privacy Policy