Waters Analytical Standards & Reagents

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The MS Qualification Standards Kit is intended to be used in the operational qualification of several MS's such as the Q-Micro and ZQ. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY UPLC/UV Qualification Standards Kit is intended for performing system-level performance qualification on an ACQUITY System with TUV or PDA detectors, with or without an ELS detector in line, using the standard 10-mm flow cell configuration. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The MS SOLUTION, FORMIC ACID is intended to be used as a modifier in MS solvents.

The Reserpine Kit is a daily use stock solution standard that should be used to optimize tune parameters and signal of your Triple Quad or Single Quad MS. The working solution can be used daily to perform ESI positive sensitivity testing.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The Quad LCMS QC Reference Material is designed for use with any chromatographic systems containing a Quad MS such as the SQD, TQD, Xevo TQ. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide: confidence in your results, reduce troubleshooting and re-run time, and enable cross lab result comparisons. It is adaptable to a wide variety of separation methods. 

The [Glu1]-Fibrinopeptide B Standard is intended to be used for mass scale calibration and as a lock mass standard in an easy to use format.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Leucine Enkephalin Kit is intended for use when setting up the Time of Flight MS detector.

The [Glu1]-Fibrinopeptide B Standard is intended to be used for mass scale calibration and as a lock mass standard in an easy to use format.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The MS Set Up Solution, Atmospheric Pressure Ionization is intended to be used for Mass Spec Set up. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.   Note that many of the compounds are concentrated and should be diluted for use with the Xevo^®series, or even the SQD.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Set Up Solution, Atmospheric Pressure Ionization is intended to be used for Mass Spec Set up. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.   Note that many of the compounds are concentrated and should be diluted for use with the Xevo^®series, or even the SQD.

The Xevo TQ-S Qualification Standards Kit is intended to qualify the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Solution - Daidzein (250 μg/L) is used to assess signal to noise on triple quad systems. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Reserpine Kit is a daily use stock solution standard that should be used to optimize tune parameters and signal of your Triple Quad or Single Quad MS. The working solution can be used daily to perform ESI positive sensitivity testing.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Xevo TQ-S Qualification Standards Kit is intended to qualify the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Qualification Standards Kit is intended to be used in the operational qualification of several MS's such as the Q-Micro and ZQ. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Xevo TQ-S Qualification Standards Kit is intended to qualify the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Tuning Solution/Gradient Performance, Sensitivity and Precision is intended to be used to perform tuning, gradient performance sensititivty and precision testing. The mix can be used on a daily basis. It comes in a 25 mL screw-on infusion container.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The SQD Standards Kit for SQD system assessment. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The MS Qualification Standards Kit is intended to be used in the operational qualification of several MS's such as the Q-Micro and ZQ. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The ACQUITY MS Test Solutions is intended for performing operational and performance qualification on an ACQUITY System with a single or triple quadrupole MS instruments, such as the SQD and TQD. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols are available via the purchase of Waters qualification services or self directed qualification training and license.  

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The SQD Set Up Solution is used as the set up solutions for single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Reserpine Kit is a daily use stock solution standard that should be used to optimize tune parameters and signal of your Triple Quad or Single Quad MS. The working solution can be used daily to perform ESI positive sensitivity testing.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The MS Calibration Solution, Atmospheric Pressure Ionization is used for calibration of mass scale and resolution check of single and triple quads. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The IonSABRE Positive Ion Sensitivity Standard for performance testing. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Reserpine Kit is a daily use stock solution standard that should be used to optimize tune parameters and signal of your Triple Quad or Single Quad MS. The working solution can be used daily to perform ESI positive sensitivity testing.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The Xevo TQ-S Set up Standard is intended to be used for set up and calibration of the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Xevo TQ-S Qualification Standards Kit is intended to qualify the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The Xevo TQ-S Set up Standard is intended to be used for set up and calibration of the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Xevo TQ-S Calibration and Resolution Standards is intended to be used for calibration and IntelliStart resolution check of the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The CI/FI optimization and Tuning kit on GCTs only is intended to optimize the chemical ionization signal and tuning of the GCT/MS system as described in the operator guide. For all MS Users who need to get their system calibrated and working quickly. The CI/FI optimization and Tuning kit is a ready to use standard calibrator that are easy to use and specially formulate for your MS. Use this standard routinely and realize productivity gains.

The LCMS QC Reference Standard is designed for use with high performance MS's like Synapt G2-S, Xevo G-S QTof. It is intended to be used as a system benchmarking standard. When used consistently and control charted, the QCRM will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons The mix is extremely versatile and appropriate for a vast variety of column chemistries and dimensions. It is adaptable to a wide variety of separation methods.

The Xevo TQ-S Calibration and Resolution Standards is intended to be used for calibration and IntelliStart resolution check of the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.  

The Xevo TQ-S Qualification Standards Kit is intended to qualify the Xevo TQ-S System. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.  Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.