- Advanced Polymer Chromatography (APC)
- UPLC with UV Detection
- GC
- GC-MS
- HPLC with RI, ELSD, Electrochemical, Fluorescence or Conductivity Detection
- HPLC or Prep Systems with UV Detection
- SFC and Convergence Chromatography (UPC2)
- Single Quadrupole Mass Detection
- Tandem Quadrupole (Triple Quadrupole )
- Time-of-flight Mass Spectrometry
- Amino Acids
- Cations
- Gel Filtration
- Gel Permeation
- Glycans
- Ion Calibration
- Oligonucleotides
- Peptides
- Pesticides
- Proteins
- QC Trace Metals
- Small Molecules
- Total Chlorine
- pH Buffers
- Quality Control (QC) Reference Material
- Reagents
- System Performance Standards and Reagents
Find Your Results


The following standards and standards kits are used for the calibration and assessment of ACQUITY UPLC® and HPLC system performance. Use of these standards and kits to benchmark and continuously monitor typical baseline performance will enhance productivity and increase the accuracy of results. These standards are designed to improve the performance of the following Waters Systems:
- Alliance®
- Bio-Alliance
- Breeze, 2998, 2996, 2489, 2487, 996, 991, 990, 490, 486, 484
Absorb Detector 10 mm Cell PQ Solution [186006684]
The Absorb Detector 10 mm Cell PQ Solution is intended to be used for assessment of HPLC UV systems. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

Alliance HT Qualification Standards Kit [700002390]
The Alliance HT Qualification Standards Kit is used for Alliance HT 2795 with UV/PDA detection qualification. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

Alliance with RI Detector Qualification Standards Kit [700002391]
The Alliance with RI Detector Qualification Standards Kit is used in the performance qualification of an Alliance system with an RI (Refractive Index) detector. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.
.jpg)
AutoPurification System Standard [716000765]
The AutoPurification System Standard allows the user to evaluate and benchmark the performance of an AutoPurification/Preparative System through fraction collection before analysis of critical material. This Quality Control Reference Material is specially formulated to allow the user to verify correct fraction collection. The test is highly valuable when performed at first use/installation, and any time the system has not been used or has had any changes.

Caffeine Standard [700003233]
The Caffeine Standard is intended to be used as the main standard in numerous performance qualification kits. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

Gradient Valve Standard [WAT042876]
The Gradient Valve Standard is intended to be used to assess the performance of the Alliance Gradient Proportioning Valve.

HPLC HT with UV Standards Kit [700003742]
The HPLC HT with UV Standards Kit is intended to be used in the performance qualification of an Alliance® HT (High Throughput) 2795 system with UV or PDA detection. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

HPLC UV Linearity Solutions for Analytical Flow Cells [700001076]
The HPLC UV Linearity Solutions for Analytical Flow Cells kit is used for Alliance® 2695 with UV/PDA detection qualification. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

HPLC with UV Standards Kit [700003741]
The HPLC with UV Standards Kit is intended to be used in the performance qualification of an Alliance® 2695 system with UV or PDA detection. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

Neutrals QC Reference Material [186006360]
The Neutrals QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The mix contains only neutral compounds. When used consistently and control charted, the QC Reference Material will provide confidence in your results, reduce troubleshooting and re-run time, and enable cross-laboratory result comparisons. This reference material is adaptable to a wide variety of separation methods.

Preparative Chromatography Mix Standard [186006703]
The Preparative Chromatography Mix Standard is a specially formulated mix for the preparative or purification system. The Preparative Chromatography Mix Standard allows the user to evaluate and benchmark their chromatography prep or purification system with UV or MS before analysis of critical material. The Preparative Chromatography Standard includes a void marker, neutral, acidic and basic compounds. It can be used with a variety of column chemistries and dimensions, and system hardware.

Reversed-Phase QC Reference Material [186006363]
The Reversed-Phase QC Reference Material is designed for use with any chromatographic systems containing a UV detector. It is intended to be used as a system benchmarking standard. The Reversed-Phase QC Reference Material is significantly more complex than the Neutrals QC Reference Material in that it contains a void marker, neutral, acidic and basic compounds which could be challenging to separate. It is designed to provide this complexity and is appropriate when complex assays are routinely performed. When used consistently and control charted, the QC Reference Material will provide - confidence in your results - reduce troubleshooting and re-run time - enable cross lab result comparisons It is adaptable to a wide variety of separation methods.

Six Cuvette set [700004156]
The Six Cuvette set is intended to be used with a UV detector containing a cuvette option.

Two Cuvette Kit (empty) [700004155]
The Two Cuvette Kit (empty) is intended to be used with a UV detector containing a cuvette option.

UV Detector Linearity Standards Kit [WAT042881]
The UV Detector Linearity Standards Kit is designed for linearity testing of UV detectors with a 10 mm flow cell using 10 cc safety syringe to manually deliver the standards into the flow cell. The kit can also be used with cuvettes for Operational Qualification of Waters HPLC TUV and PDA detectors, such as the 2487, 996, 2996, 2489, or 2998. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

UV Detector Linearity Standards Kit for 3 mm Flow Cell [WAT047634]
The UV Detector Linearity Standards Kit for 3 mm Flow Cell is used to perform Operational Qualification Linearity check on UV detectors such as the 486 with a 3mm flow cell using a 10cc safety syringe to manually deliver the standards into the flow cell. This kit can be used with cuvettes or flow cell for Operational Qualification of HPLC UV and PDA detectors, such as the 2487, 996, 2996, 2489, or 2998. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

UV Detector PQ Standard [WAT042887]
The UV Detector PQ Standard Kit contains standards appropriate for assessment of HPLC UV systems. This includes area, height and retention time reproducibility, and injector linearity. The UV Detector PQ Standard Kit should be used as a performance standard to assess system performance with a 4 compound separation. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

UV Wavelength Accuracy Kit (Erbium Perchlorate) [WAT042885]
The UV Wavelength Accuracy Kit (Erbium Perchlorate) is used to perform Operational Qualification procedures for wavelength accuracy on HPLC TUV/PDA detectors such as the 2487, 996, 2996, 2489, and 2998 using either cuvettes or via manual delivery with a 10 cc safety syringe. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.

UV Wavelength Accuracy Kit (uracil) [WAT042879]
The UV Wavelength Accuracy kit if is used to perform Operational Qualification procedures for wavelength accuracy on UV detectors, such as the 486, 490, LC Module I. A 10 cc safety syringe is used to manually deliver the standards to the flow cell. you have certification or SOPs for system qualification. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity. Protocols in the use of this kit are available via the purchase of Waters qualification services or self directed qualification training and license.
