BEH125 Protein Standard Mix [186006519]

  • Product
  • Documents
  • Columns & Vials
  • Systems

BEH125 Protein Standard Mix [186006519]

The BEH125 SEC Protein Standard Mix is used to benchmark the ACQUITY UPLC Protein BEH SEC 125, 1.7 µm Columns. This standard should be used on a regular basis for evaluation of column and system performance. This 4-component intact protein mixture contains 0.15 mg/vial of ribonuclease A, 0.05 mg/vial of thyroglobulin, 0.15 mg/vial of ovalbumin, and 0.025 mg/vial uracil.

The product is packaged in a Waters TruView Vial (ideal for peptides) as a lyophilized powder. Recommended solubilization is in 500 µL of 100mM Sodium Phosphate pH buffer 6.8.

Store at -20 °C immediately upon arrival.

  • ACQUITY UPLC Protein BEH SEC Column, 125Å, 1.7 µm, 4.6 mm X 150 mm, 1K - 80K, 1/pk (186006505)
  • ACQUITY UPLC Protein BEH SEC Column, 125Å, 1.7 µm, 4.6 mm X 300 mm, 1K - 80K, 1/pk (186006506)
  • ACQUITY UPLC Protein BEH SEC Guard Column, 125Å, 1.7 µm, 4.6 mm X 30 mm, 1K - 80K, 1/pk (186006504)
  • TruView LCMS Certified Vials (186005666CV)

System Performance Standards Key

Set Up

Setup standards are used upon installation of a new system, start-up of a system which has been idle for a period of time, or to re-start a system that has been moved to a new location. These standards may include multiple components within a kit which allow step by step setup and calibration, or they can be single mixtures which will enable a full system assessment and initialization.


These standards can be used for instrument calibration. Calibration is usually performed at a frequency that minimizes the risk of being out of calibration, in addition to major events suc h as when the instrument is moved and upon any major repair. Calibration can be confirmed as often as your standard operating procedures recommend. Look for solutions to calibrate your MS mass accuracy and resolution, UV detector linearity, UV and Fluorescence detector wavelength accuracy, injector accuracy and precision, and solvent system flow rate accuracy.


Your system is comprised of many interdependent components working together. An issue with any one component can produce erroneous final results. All components performing correctly will produce results within an expected variability. Some of the system components include mobile phase, column, tubing, pumping, injecting, temperature controlling, detecting, data collection rate, and integration
parameters. An issue in any one of the components listed can affect your result.
Performance Check Standards should be utilized on a routine basis. This includes anytime a column is changed, a method is changed, the instrument is moved, or confirmation of system performance is desired. Confirming the performance of your system can be done on a system basis with suitability standards or per individual instrument component. Benchmark performance should be established after
calibration and confirmed regularly.


These Mass Spectrometry solutions are used routinely and are available for every ionization mode. Use the solution to optimize the mass spectrometer setting for optimal signal either manually or through Intellistart.


This product contains hazardous material which requires special freight handling. Additional charges may apply.

Have a Question?

Get Expert Advice!

Contact Us | Sales Offices

Related Product

MassPREP Protein Standard Mix [186004900]

The MassPREP™ Protein Standard Mix is designed for verification of HPLC/UPLC

Related Product

BEH200 SEC Protein Standard Mix [186006518]

The BEH200 SEC Protein Standard Mix is used for benchmarking the ACQUITY UPLC

Related Product

BEH450 SEC Protein Standard Mix [186006842]

The BEH450 SEC Protein Standard Mix is used to benchmark the ACQUITY UPLC Protein BEH SEC 450, ...

34 Maple Street Milford, MA USA
T: 508-478-2000
F: 508-872-1990
Sales Offices

© 2021 Waters Corporation
Terms and Conditions | Privacy Policy