GlycoWorks HILIC 1 cc Flangeless Catridge [186007239]

  • Product
  • Documents
  • Columns & Vials

GlycoWorks HILIC 1 cc Flangeless Catridge [186007239]

The GlycoWorks HILIC 1 cc Flangeless Cartridge Pack is dual purpose; the cartidges can be used for both the extraction of glycans as well as the removal of excess labeling reagent. The flangeless version is designed specifically for customers who use the positive pressure manifold (PPM). Each pack contains 20, 1 cc cartridges for a total of 10 reactions for low sample volume environments following the GlycoWorks Single Use protocol.

Each cartridge is packed with 10 mg of Waters HILIC solid-phase extraction (SPE).

Store at room temperature in a dessicator.

  • ACQUITY UPLC Glycan BEH Amide Column, 130Å, 1.7 µm, 2.1 mm X 100 mm, 1/pk (186004741)
  • XBridge Glycan BEH Amide Column, 130Å, 3.5 µm, 2.1 mm X 100 mm, 1/pk (186007503)

System Performance Standards Key

Set Up

Setup standards are used upon installation of a new system, start-up of a system which has been idle for a period of time, or to re-start a system that has been moved to a new location. These standards may include multiple components within a kit which allow step by step setup and calibration, or they can be single mixtures which will enable a full system assessment and initialization.


These standards can be used for instrument calibration. Calibration is usually performed at a frequency that minimizes the risk of being out of calibration, in addition to major events suc h as when the instrument is moved and upon any major repair. Calibration can be confirmed as often as your standard operating procedures recommend. Look for solutions to calibrate your MS mass accuracy and resolution, UV detector linearity, UV and Fluorescence detector wavelength accuracy, injector accuracy and precision, and solvent system flow rate accuracy.


Your system is comprised of many interdependent components working together. An issue with any one component can produce erroneous final results. All components performing correctly will produce results within an expected variability. Some of the system components include mobile phase, column, tubing, pumping, injecting, temperature controlling, detecting, data collection rate, and integration
parameters. An issue in any one of the components listed can affect your result.
Performance Check Standards should be utilized on a routine basis. This includes anytime a column is changed, a method is changed, the instrument is moved, or confirmation of system performance is desired. Confirming the performance of your system can be done on a system basis with suitability standards or per individual instrument component. Benchmark performance should be established after
calibration and confirmed regularly.


These Mass Spectrometry solutions are used routinely and are available for every ionization mode. Use the solution to optimize the mass spectrometer setting for optimal signal either manually or through Intellistart.


This product contains hazardous material which requires special freight handling. Additional charges may apply.

Have a Question?

Get Expert Advice!

Contact Us | Sales Offices

Related Product

GlycoWorks High-throughput Prep Kit [176003090]

The GlycoWorks High-throughput Sample Preparation Kit works synergistically with Waters ACQUIT ...

Related Product

GlycoWorks Single Use Prep Kit [176003119]

The GlycoWorks Single Use Sample Preparation Kit was developed and rigorously tested to synerg ...

Related Product

GlycoWorks Control Standard [186007033]

The GlycoWorks

Related Product

GlycoWorks Reagent Kit [186007034]

The GlycoWorks Reagent Kit is provides reagents needed for both digestion and labeling reactio ...

Related Product

GlycoWorks HILIC 1 cc Catridge, 20/pk [186007080]

The GlycoWorks HILIC 1 cc Cartridge Pack is dual purpose; the catridges can be used for both t ...

34 Maple Street Milford, MA USA
T: 508-478-2000
F: 508-872-1990
Sales Offices

© 2021 Waters Corporation
Terms and Conditions | Privacy Policy